South Bend Purdue ECET 227 Parts Kit

ECET 227 parts kit
ECET 22700 Parts Kit
Qty Item
1 Roll of 3/4" masking tape
2 4-40 x 3/8" machine screw
2 4-40 nut
2 TO220 heat sink Avid529802
10 1A slow blow fuse
2 2A 250V SOCSS2 0.25x1.25" slow-blow fuse for HP supplies
2 3A fuse for Agilent DMMs
1 Full size breadboard, 830 tie points 
1 DMM lead, Banana to Mini-grabber test lead (Blue)
1 DMM lead, Banana to Mini-grabber test lead (Yellow)
1 DMM lead, Banana to Mini-grabber test lead (Green)
1 DMM lead, Banana to Mini-grabber test lead (White)
1 Test lead, mini-grabber hook on each end, 12", red
1 Test lead, mini-grabber hook on each end, 12", black
2 BNC to Mini-grabber cable 
1 BNC T connector
1 female BNC jack
1 68 Ohm 5W resistor
1 220 pF capacitor, CER 1kV DC 
1 22 pF capacitor
1 2.2 nF capacitor, FILM 0.022 uF 100V DC
2 22 uF capacitor, 50V DC
1 220 uF capacitor, 50V DC 
1 330 pF capacitor, 50V DC
1 470 pF capacitor, CER 470PF 2kV DC
1 47 nF capacitor, FILM 0.047UF 250V DC
2 47 uF capacitor, 50V DC
1 470 uF capacitor, 50V DC
1 Trimmer 100 ohm 0.5W 1 turn
1 Trimmer 1 k ohm 0.5W 1 turn
1 Trimmer 10 k ohm 0.5W 1 turn
1 Trimmer 100 ohm 0.75W 15 turn
1 Trimmer 1k ohm 0.75W 15 turn
1 Trimmer 10k ohm 0.75W 15 turn
1 470 uH Toroid inductor, 1 Amp
2 MBR1100, 1A, 100V Schottky diode
2 1N914 signal diode
8 1N4004, 1A rectifier diode
2 1N4733A, 5.1V @ 1W Zener diode,DO-41
2 2N3904, NPN signal transistor
2 2N3906 PNP signal transistor
1 IRF3709 or FQP30N06L, N channel MOSFET
4 IRF3710, N channel MOSFET, 100V
2 IRF9530, P channel MOSFET, 100V
2 LM317T-adj  voltage regulator
2 7406, open collector logic inverter, 14-DIP
1 IRS2003 MOS driver, IC DRIVER HALF-BRIDGE 8-DIP
1 TLC082 Op-amp
1 MCP4901 8-bit DAC
1 LM3578, Switching regulator, 8-DIP
2 LM741C, general purpose op amp 8-DIP
1 Header Pins, Board to Board, straight
1 right angle header pins

*Picture may not represent actual contents in kit.Use above list for actual kit contents.

  * Marked fields are required.
Qty*
Price $154.92
Availability Back Ordered