South Bend ECET 227 Parts Kit
| ECET 22700 Parts Kit | |
| Qty | Item |
| 1 | Roll of 3/4" masking tape |
| 2 | 4-40 x 3/8" machine screw |
| 2 | 4-40 nut |
| 2 | TO220 heat sink Avid529802 |
| 10 | 1A slow blow fuse |
| 2 | 2A 250V SOCSS2 0.25x1.25" slow-blow fuse for HP supplies |
| 2 | 3A fuse for Agilent DMMs |
| 1 | Full size breadboard, 830 tie points |
| 1 | DMM lead, Banana to Mini-grabber test lead (Blue) |
| 1 | DMM lead, Banana to Mini-grabber test lead (Yellow) |
| 1 | DMM lead, Banana to Mini-grabber test lead (Green) |
| 1 | DMM lead, Banana to Mini-grabber test lead (White) |
| 1 | Test lead, mini-grabber hook on each end, 12", red |
| 1 | Test lead, mini-grabber hook on each end, 12", black |
| 2 | BNC to Mini-grabber cable |
| 1 | BNC T connector |
| 1 | female BNC jack |
| 1 | 68 Ohm 5W resistor |
| 1 | 220 pF capacitor, CER 1kV DC |
| 1 | 22 pF capacitor |
| 1 | 2.2 nF capacitor, FILM 0.022 uF 100V DC |
| 2 | 22 uF capacitor, 50V DC |
| 1 | 220 uF capacitor, 50V DC |
| 1 | 330 pF capacitor, 50V DC |
| 1 | 470 pF capacitor, CER 470PF 2kV DC |
| 1 | 47 nF capacitor, FILM 0.047UF 250V DC |
| 2 | 47 uF capacitor, 50V DC |
| 1 | 470 uF capacitor, 50V DC |
| 1 | Trimmer 100 ohm 0.5W 1 turn |
| 1 | Trimmer 1 k ohm 0.5W 1 turn |
| 1 | Trimmer 10 k ohm 0.5W 1 turn |
| 1 | Trimmer 100 ohm 0.75W 15 turn |
| 1 | Trimmer 1k ohm 0.75W 15 turn |
| 1 | Trimmer 10k ohm 0.75W 15 turn |
| 1 | 470 uH Toroid inductor, 1 Amp |
| 2 | MBR1100, 1A, 100V Schottky diode |
| 2 | 1N914 signal diode |
| 8 | 1N4004, 1A rectifier diode |
| 2 | 1N4733A, 5.1V @ 1W Zener diode,DO-41 |
| 2 | 2N3904, NPN signal transistor |
| 2 | 2N3906 PNP signal transistor |
| 1 | IRF3709 or FQP30N06L, N channel MOSFET |
| 4 | IRF3710, N channel MOSFET, 100V |
| 2 | IRF9530, P channel MOSFET, 100V |
| 2 | LM317T-adj voltage regulator |
| 2 | 7406, open collector logic inverter, 14-DIP |
| 1 | IRS2003 MOS driver, IC DRIVER HALF-BRIDGE 8-DIP |
| 1 | TLC082 Op-amp |
| 1 | MCP4901 8-bit DAC |
| 1 | LM3578, Switching regulator, 8-DIP |
| 2 | LM741C, general purpose op amp 8-DIP |
| 1 | Header Pins, Board to Board, straight |
| 1 | right angle header pins |
| 1 | Course notes |
*Picture may not represent actual contents in kit.Use above list for actual kit contents.
