USB to TTL RS232 Serial cable

USB to TTL serial cable
  • TTL-232R-RPi Debug cable provides a USB to TTL Serial interface for Raspberry Pi computer. 
  • On board FT232RQ provides single chip USB to asynchronous serial data transfer interface. 
  • Entire USB protocol handled by the electronics in the cable USB. 
  • Connect directly to a microcontroller UART or I/O pins. 
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. 
  • Fully assisted or X-On / X-Off software handshaking. 
  • Data transfer rates from 300 baud to 3 Mbaud at TTL levels. 
  • Internal EEPROM with user writeable area. 
  • 5V safe TTL inputs make the TTL-232R easy to interface to 5V MCU’s.  
  • FTDI’s royalty-free VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface. 
  • Support for FT232R FTDIChip-ID™ feature for improved security. 
  • 3x ‘flying leads’ outputs provide TXD, RXD and GND signals. 
  • Low USB bandwidth consumption. 
  • UHCI / OHCI / EHCI host controller compatible. 
  • USB 2.0 Full Speed compatible. 
  • -40°C to +85°C operating temperature range.  
  • Cable length is 1.0m.  
  • FCC and CE compliant.
  • Data Sheet 
  * Marked fields are required.
Price $16.85
Availability In-Stock